TMAM 2015:The 2015 International Conference on
Theoretical Mechanics and Applied Mechanics

Vienna, Austria, March 15-17, 2015

About the Conference

* The Proceedings of the Conference will be published in CD-ROM and Hard-Copy (as book) with all the accepted and registered papers of the conferences and will be sent for indexing to: ISI (Thomson Reuters), ELSEVIER, SCOPUS, Zentralblatt MATH, British Library, EBSCO, SWETS, EMBASE, CAS - American Chemical Society, EI Compendex, Engineering Village, DoPP, GEOBASE, Biobase, TIB|UB - German National Library of Science and Technology, American Mathematical Society (AMS), Inspec - The IET, Ulrich's International Periodicals Directory, Scholar Google.  Authors that prefer their publication in a Springer Verlag Volume can contact us: support@inase.org  

*
Extended Versions of all the Invited and Regular Papers will be published after the conference in 21 ISI Indexed Journals.

* Authors that prefer their extended version to appear in a Springer Verlag Volume can contact us after the conference at support@inase.org 

* Contact us by email: support@inase.org   Registration fees       Publication Ethics and Malpractice Statement     Deadlines
 (Previous Conference: TMAM 2014, March of 2014 in Venice, Italy)     Check our recent conferences in Santorini, Varna, and Interlaken

Join Mailing List: If you wish to be notified about our INASE conferences, research projects, publications and other important activities you can subscribe to INASE Newsletter. Enter your email address here:  

Paper Submission

Papers must be written in the correct format:  MS Word.doc  or LaTeX  or LaTeX2   and must be uploaded using the following form as .doc, or .pdf file. As in all the Previous Conferences, all the accepted and registered Papers will be indexed as peer-reviewed publications in ISI and SCOPUS and will be published in CD-ROM and Book (hard-copy). Extended Versions of all the Invited and Regular Papers will be published after the conference in 21 ISI Indexed Journals. Authors that prefer their extended version to appear in a Springer Verlag Volume can contact us after the conference at support@inase.org. Only full papers will be promoted to reviewers for thorough peer review. For the review process only active scholars with many recent publications in ISI and/or SCOPUS will be used and the list with their names will be published in the Proceedings: Hard-Copy and CD-ROM as in all our previous conferences.  The deadline for paper submission expired. We do not accept papers any longer.

 

Organizing Committee

General Chairs (Editors of Proceedings)

  1. Prof. Bogdan Epureanu,
    University of Michigan
    Ann Arbor, MI 48109, USA
  2. Prof. Cho W. Solomon To,
    ASME Fellow, University of Nebraska,
    Lincoln, Nebraska, USA
  3. Prof. Hyung Hee Cho, ASME Fellow
    Yonsei University
    and The National Acamedy of Engineering of Korea,
    Korea

Senior Program Chair

  1. Prof. Philippe Dondon
    ENSEIRB
    Rue A Schweitzer 33400 Talence
    France

Program Chairs

  1. Prof. Zhongmin Jin,
    Xian Jiaotong University, China
    and University of Leeds, UK
  2. Prof. Constantin Udriste,
    University Politehnica of Bucharest,
    Bucharest
    Romania
  3. Prof. Sandra Sendra
    Instituto de Inv. para la Gestión Integrada de Zonas Costeras (IGIC)
    Universidad Politécnica de Valencia
    Spain

Tutorials Chair

  1. Prof. Pradip Majumdar
    Department of Mechanical Engineering
    Northern Illinois University
    Dekalb, Illinois, USA

Special Session Chair

  1. Prof. Pavel Varacha
    Tomas Bata University in Zlin
    Faculty of Applied Informatics
    Department of Informatics and Artificial Intelligence
    Zlin, Czech Republic
     

Workshops Chair

  1. Prof. Ryszard S. Choras
    Institute of Telecommunications
    University of Technology & Life Sciences
    Bydgoszcz, Poland

Local Organizing Chair

  1. Prof. Klimis Ntalianis,
    Tech. Educ. Inst. of Athens (TEI), Athens, Greece

Publication Chair

  1. Prof. Gongnan Xie
    School of Mechanical Engineering
    Northwestern Polytechnical University, China

Publicity Committee

  1. Prof. Reinhard Neck
    Department of Economics
    Klagenfurt University
    Klagenfurt, Austria
  2. Prof. Myriam Lazard
    Institut Superieur d' Ingenierie de la Conception
    Saint Die, France

International Liaisons

  1. Prof. Ka-Lok Ng
    Department of Bioinformatics
    Asia University
    Taichung, Taiwan
  2. Prof. Olga Martin
    Applied Sciences Faculty
    Politehnica University of Bucharest
    Romania
  3. Prof. Vincenzo Niola
    Departement of Mechanical Engineering for Energetics
    University of Naples "Federico II"
    Naples, Italy
  4. Prof. Eduardo Mario Dias
    Electrical Energy and Automation
    Engineering Department
    Escola Politecnica da Universidade de Sao Paulo
    Brazil

Steering Committee

  • Prof. Aida Bulucea, University of Craiova, Romania
  • Prof. Zoran Bojkovic, Univ. of Belgrade, Serbia
  • Prof. Metin Demiralp, Istanbul Technical University, Turkey
  • Prof. Imre Rudas, Obuda University, Budapest, Hungary

Program Committee

  • Prof. Cho W. Solomon To, ASME Fellow, University of Nebraska, Lincoln, Nebraska, USA
  • Prof. Kumar Tamma, University of Minnesota, Minneapolis, MN, USA
  • Prof. Pierre-Yves Manach, Universite de Bretagne-Sud, Bretagne, France
  • Prof. Jiin-Yuh Jang, University Distinguished Prof., ASME Fellow, National Cheng-Kung University, Taiwan
  • Prof. Hyung Hee Cho, ASME Fellow, Yonsei University (and National Acamedy of Engineering of Korea), Korea
  • Prof. Robert Reuben, Heriot-Watt University, Edinburgh, Scotland, UK
  • Prof. Ali K. El Wahed, University of Dundee, Dundee, UK
  • Prof. Yury A. Rossikhin, Voronezh State University of Architecture and Civil Engineering, Voronezh, Russia
  • Prof. Igor Sevostianov, New Mexico State university, Las Cruces, NM, USA
  • Prof. Ramanarayanan Balachandran, University College London, Torrington Place, London, UK
  • Prof. Sorinel Adrian Oprisan, Department of Physics and Astronomy, College of Charleston, USA
  • Prof. Yoshihiro Tomita, Kobe University, Kobe, Hyogo, Japan
  • Prof. Ottavia Corbi, University of Naples Federico II, Italy
  • Prof. Xianwen Kong, Heriot-Watt University, Edinburgh, Scotland, UK
  • Prof. Christopher G. Provatidis, National Technical University of Athens, Zografou, Athens, Greece
  • Prof. Ahmet Selim Dalkilic, Yildiz Technical University, Besiktas, Istanbul, Turkey
  • Prof. Essam Eldin Khalil, ASME Fellow, Cairo University, Cairo, Egypt
  • Prof. Jose Alberto Duarte Moller, Centro de Investigacion en Materiales Avanzados SC, Mexico
  • Prof. Seung-Bok Choi, College of Engineering, Inha University, Incheon, Korea
  • Prof. Marina Shitikova, Voronezh State University of Architecture and Civil Engineering, Voronezh, Russia
  • Prof. J. Quartieri, University of Salerno, Italy
  • Prof. Marcin Kaminski, Department of Structural Mechanics, Al. Politechniki 6, 90-924 Lodz, Poland
  • Prof. ZhuangJian Liu, Department of Engineering Mechanics, Institute of High Performance Computing, Singapore
  • Prof. Abdullatif Ben-Nakhi, College of Technological Studies, Paaet, Kuwait
  • Prof. Junwu Wang, Institute of Process Engineering, Chinese Academy of Sciences, China
  • Prof. Jia-Jang Wu, National Kaohsiung Marine University, Kaohsiung City, Taiwan (ROC)
  • Prof. Moran Wang, Tsinghua University, Beijing, China
  • Prof. Gongnan Xie, Northwestern Polytechnical University, China
  • Prof. Ali Fatemi, The University of Toledo, Ohio, USA
  • Prof. Mehdi Ahmadian, Virginia Tech, USA
  • Prof. Gilbert-Rainer Gillich, "Eftimie Murgu" University of Resita, Romania
  • Prof. Mohammad Reza Eslami, Tehran Polytechnic (Amirkabir University of Technology), Tehran, Iran
  • Dr. Anand Thite, Faculty of Technology, Design and Environment Wheatley Campus, Oxford Brookes University, Oxford, UK
  • Dr. Alireza Farjoud, Virginia Tech, Blacksburg, VA 24061, USA
  • Dr. Claudio Guarnaccia, University of Salerno, Italy

Topics of Interest

Plasticity, Fracture and Damage Mechanics, Fatigue Analysis and Design of Welded Structures, Mechanics of Nanomaterials, Fluid-Structure Interaction, Damage Identification and Non Destructive Evaluation (NDE), Computational and Experimental Mechanics, Geomechanics and Mechanics of Granular Materials, Flows in Porous Media, Impact and Multibody, Dynamics, Nonlinear Dynamics, Structural Dynamics and Control, Dynamic Instability and Buckling, Vibrations, Acoustics and Noise Control, Manufacturing Processes, Advanced Materials and Smart Structures, Micro ElectroMechanical Systems (MEMS), Mechatronics, Transport Phenomena in Micro/Nanoscale, Aerodynamics and Aeroelasticity, Computational Fluid Dynamics (CFD), Turbulence and Multiphase Flows, Biomechanics and Biomaterials, Surface Engineering and Contact Mechanics, Heat and Mass Transfer, Compressible Flows, Applications Others...

Location and Venue

Conference Guide

About:     Vienna, Austria     Map of  Vienna, Austria     Photos from Vienna, Austria     Conference Venue     How to get to Vienna, Austria    Vienna, Austria Travel Guide

Conference Publications

Accepted Papers are going to be published in

(a) Book, Hard-Copy Proceedings (will be sent for indexing to: ISI, SCOPUS, EI Compendex, AMS, ACS, CiteSeerX, Zentralblatt, British Library, EBSCO, SWETS, EMBASE, CAS, Scholar Google etc)


(b) CD-ROM Proceedings (will be sent for indexing to: ISI, SCOPUS, EI Compendex, AMS, ACS, CiteSeerX, Zentralblatt, British Library, EBSCO, SWETS, EMBASE, CAS, Scholar Google etc)


(c) Extended Versions of all the Invited and Regular Papers will be published after the conference in 21 ISI Indexed Journals.
* Authors that prefer their extended version to appear in a Springer Verlag Volume can contact us at support@inase.org


(d) E-Library with free access for all (no username, no password).