ME 2017:The 2017 International Conference on
Mechanical Engineering

Athens, Greece, April 9-11 2017

About the Conference

* Invited and Regular Papers will be published in various Indexed Journals (ISI, SCOPUS, EBSCO, DBLP, ACM, IET/INSPEC, Proquest, Copernicus etc...) based on quality and reviewers' recommendations or in our Books in Springer Verlag. Click here


* Authors will be informed about the title of the Journal before their registration.
 

* Contact us by email: support@inase.org   Registration fees       Publication Ethics and Malpractice Statement     Deadlines
 (Previous Conference: ME 2016, Vienna, Austria, January 15-17, 2016)

PLENARY SPEAKERS:


Prof. Badea Lepadatescu, Faculty of Technological Engineering and Industrial Management, Transylvania University of Brasov, ROMANIA, e-mail: lepadatescu@unitbv.ro
Title: "Some Considerations Regarding the Performances of Machining by Superfinishing Process"
Abstract: In the paper is presented some considerations regarding the use of superfinishing process in machining rotationally symmetrical workpieces to improve their surface structure as fine as 0,012 μm Ra. Also are related some results of our research connected to this manufacturing process using different process parameters. The data that were obtained by these researches allow us to design and to realize a machine tool of superfinishing method by using two types of reciprocating motions of the abrasives tool which led us to achieve a better surface texture parameters of the workpieces.


Join Mailing List: If you wish to be notified about our INASE conferences, research projects, publications and other important activities you can subscribe to INASE Newsletter. Enter your email address here:  

Paper Submission

Papers must be written in the correct format:  MS Word.doc  or LaTeX  or LaTeX2   and must be uploaded using the following form as .doc, or .pdf file. Invited and Regular Papers will be published in various Indexed Journals based on quality and reviewers' recommendations. Only full papers will be promoted to reviewers for thorough peer review.  You can upload your paper using the following submission form:

 

Organizing Committee

General Chairs (Editors of Proceedings)

  1. Prof. Bogdan Epureanu,
    University of Michigan
    Ann Arbor, MI 48109, USA
  2. Prof. Cho W. Solomon To,
    ASME Fellow, University of Nebraska,
    Lincoln, Nebraska, USA
  3. Prof. Hyung Hee Cho, ASME Fellow
    Yonsei University
    and The National Acamedy of Engineering of Korea,
    Korea

Senior Program Chair

  1. Prof. Philippe Dondon
    ENSEIRB
    Rue A Schweitzer 33400 Talence
    France

Program Chairs

  1. Prof. Zhongmin Jin,
    Xian Jiaotong University, China and
    University of Leeds, UK
  2. Prof. Constantin Udriste,
    University Politehnica of Bucharest,
    Bucharest
    Romania
  3. Prof. Sandra Sendra
    Instituto de Inv. para la Gestión Integrada de Zonas Costeras (IGIC)
    Universidad Politécnica de Valencia
    Spain

Tutorials Chair

  1. Prof. Pradip Majumdar
    Department of Mechanical Engineering
    Northern Illinois University
    Dekalb, Illinois, USA

Special Session Chair

  1. Prof. Pavel Varacha
    Tomas Bata University in Zlin
    Faculty of Applied Informatics
    Department of Informatics and Artificial Intelligence
    Zlin, Czech Republic

Workshops Chair

  1. Prof. Ryszard S. Choras
    Institute of Telecommunications
    University of Technology & Life Sciences
    Bydgoszcz, Poland

Local Organizing Chair

  1. Prof. Klimis Ntalianis,
    Tech. Educ. Inst. of Athens (TEI), Athens, Greece

Publication Chair

  1. Prof. Gongnan Xie
    School of Mechanical Engineering
    Northwestern Polytechnical University, China

Publicity Committee

  1. Prof. Reinhard Neck
    Department of Economics
    Klagenfurt University
    Klagenfurt, Austria
  2. Prof. Myriam Lazard
    Institut Superieur d' Ingenierie de la Conception
    Saint Die, France

International Liaisons

  1. Prof. Ka-Lok Ng
    Department of Bioinformatics
    Asia University
    Taichung, Taiwan
  2. Prof. Olga Martin
    Applied Sciences Faculty
    Politehnica University of Bucharest
    Romania
  3. Prof. Vincenzo Niola
    Departement of Mechanical Engineering for Energetics
    University of Naples "Federico II"
    Naples, Italy
  4. Prof. Eduardo Mario Dias
    Electrical Energy and Automation
    Engineering Department
    Escola Politecnica da Universidade de Sao Paulo
    Brazil

Steering Committee

  • Prof. Aida Bulucea, University of Craiova, Romania
  • Prof. Zoran Bojkovic, Univ. of Belgrade, Serbia
  • Prof. Claudio Guarnaccia, University of Salerno, Italy
  • Prof. Imre Rudas, Obuda University, Budapest, Hungary

Program Committee

  • Prof. Cho W. Solomon To, ASME Fellow, University of Nebraska, Lincoln, Nebraska, USA
  • Prof. Kumar Tamma, University of Minnesota, Minneapolis, MN, USA
  • Prof. Ottavia Corbi, University of Naples Federico II, Naples, Italy
  • Prof. Pierre-Yves Manach, Universite de Bretagne-Sud, Bretagne, France
  • Prof. Jiin-Yuh Jang, University Distinguished Prof., ASME Fellow, National Cheng-Kung University, Taiwan
  • Prof. Hyung Hee Cho, ASME Fellow, Yonsei University (and National Acamedy of Engineering of Korea), Korea
  • Prof. Robert Reuben, Heriot-Watt University, Edinburgh, Scotland, UK
  • Prof. Ali K. El Wahed, University of Dundee, Dundee, UK
  • Prof. Yury A. Rossikhin, Voronezh State University of Architecture and Civil Engineering, Voronezh, Russia
  • Prof. Igor Sevostianov, New Mexico State university, Las Cruces, NM, USA
  • Prof. Ramanarayanan Balachandran, University College London, Torrington Place, London, UK
  • Prof. Sorinel Adrian Oprisan, Department of Physics and Astronomy, College of Charleston, USA
  • Prof. Yoshihiro Tomita, Kobe University, Kobe, Hyogo, Japan
  • Prof. Ottavia Corbi, University of Naples Federico II, Italy
  • Prof. Xianwen Kong, Heriot-Watt University, Edinburgh, Scotland, UK
  • Prof. Christopher G. Provatidis, National Technical University of Athens, Zografou, Athens, Greece
  • Prof. Ahmet Selim Dalkilic, Yildiz Technical University, Besiktas, Istanbul, Turkey
  • Prof. Essam Eldin Khalil, ASME Fellow, Cairo University, Cairo, Egypt
  • Prof. Jose Alberto Duarte Moller, Centro de Investigacion en Materiales Avanzados SC, Mexico
  • Prof. Seung-Bok Choi, College of Engineering, Inha University, Incheon, Korea
  • Prof. Marina Shitikova, Voronezh State University of Architecture and Civil Engineering, Voronezh, Russia
  • Prof. J. Quartieri, University of Salerno, Italy
  • Prof. Marcin Kaminski, Department of Structural Mechanics, Al. Politechniki 6, 90-924 Lodz, Poland
  • Prof. ZhuangJian Liu, Department of Engineering Mechanics, Institute of High Performance Computing, Singapore
  • Prof. Abdullatif Ben-Nakhi, College of Technological Studies, Paaet, Kuwait
  • Prof. Junwu Wang, Institute of Process Engineering, Chinese Academy of Sciences, China
  • Prof. Jia-Jang Wu, National Kaohsiung Marine University, Kaohsiung City, Taiwan (ROC)
  • Prof. Moran Wang, Tsinghua University, Beijing, China
  • Prof. Gongnan Xie, Northwestern Polytechnical University, China
  • Prof. Ali Fatemi, The University of Toledo, Ohio, USA
  • Prof. Mehdi Ahmadian, Virginia Tech, USA
  • Prof. Gilbert-Rainer Gillich, "Eftimie Murgu" University of Resita, Romania
  • Prof. Mohammad Reza Eslami, Tehran Polytechnic (Amirkabir University of Technology), Tehran, Iran
  • Dr. Anand Thite, Faculty of Technology, Design and Environment Wheatley Campus, Oxford Brookes University, Oxford, UK
  • Dr. Alireza Farjoud, Virginia Tech, Blacksburg, VA 24061, USA
  • Dr. Claudio Guarnaccia, University of Salerno, Italy

Topics of Interest

Aerodynamics, Fluid Dynamics, Compressible Flows, Computational Mechanics, Biomechanics, Automotive Engineering, Heat and Mass Transfer, Nanomaterial Engineering, Plasticity Mechanics, Fracture, Geomechanics, Multibody Dynamics, Nonlinear Dynamics, Structural Dynamics, Vibrations, Acoustics, Noise Control, Material Engineering, Transport Phenomena, Manufacturing Process, Mechatronics,  Others..

Location and Venue

About:     Athens, Greece     Map of  Athens     Photos from Athens     Conference Venue     How to get to Athens    Athens Travel Guide

Conference Publications

* Invited and Regular Papers will be published in various Indexed Journals based on quality and reviewers' recommendations.

* Authors will be informed about the title of the Journal before their registration.