MEROSTA 2018:The 2018 International Conference on
Mechatronics and Robotics, Structural Analysis

Majorca, Spain, July 14-17, 2018

About the Conference

Revised versions of the accepted Papers, after strict peer review, will be published in the following Journals indexed in many reputable indexes, like Web of Science (Database: Emerging Sources Citation Index), SCOPUS, EI Compendex, IET, Google Scholar. For the indexing of a particular journal visit its web page.

International Journal on Advanced Science, Engineering and Information Technology
http://ijaseit.insightsociety.org/

International Journal of Computers and Applications (Taylor and Francis)
http://www.tandfonline.com/toc/tjca20/current

ARPN Journal of Engineering and Applied Sciences
http://www.arpnjournals.com/jeas/

International Journal of Applied Engineering Research (IJAER)
http://www.ripublication.com/ijaer.htm

International Journal of Applied Mathematics and Statistics
http://www.ceser.in/ceserp/index.php/ijamas

International Journal of Applied Mathematics and Computer Science
https://www.amcs.uz.zgora.pl/

Journal of Electrical Systems (JES)
http://journal.esrgroups.org/jes/

International Journal of Imaging and Robotics
http://www.ceser.in/ceserp/index.php/iji

Advances in Electrical and Electronic Engineering
http://advances.utc.sk/index.php/AEEE/index

International Journal of Electrical and Computer Engineering (IJECE)
http://iaesjournal.com/online/index.php/IJECE

International Journal of Tomography & Simulation
http://www.ceser.in/ceserp/index.php/ijts

TELKOMNIKA: Telecommunication, Computing, Electronics and Control
http://telkomnika.ee.uad.ac.id/

International Journal of Ecology & Development
http://www.ceser.in/ceserp/index.php/ijed

International Journal of Ecological Economics and Statistics
http://www.ceser.in/ceserp/index.php/ijees

International Journal of Artificial Intelligence
http://www.ceser.in/ceserp/index.php/ijai

or in other similar journals indexed in: Web of Science (Database: Emerging Sources Citation Index), SCOPUS, EI Compendex, IET, Google Scholar. Extended versions of the best papers will be published in Books in Springer Verlag or in other important journals.

* Authors will be informed about the title of the Journal before their registration. 

* Contact us by email: support@inase.org   Registration fees       Publication Ethics and Malpractice Statement     Deadlines
 (Previous Conference: MEROSTA 2017, Agia Pelagia Beach, Crete, Greece, July 14-17, 2017)

Join Mailing List: If you wish to be notified about our INASE conferences, research projects, publications and other important activities you can subscribe to INASE Newsletter. Enter your email address here:  

Paper Submission

Papers must be written in the correct format:  MS Word.doc  or LaTeX  or LaTeX2   and must be uploaded using the following form as .doc, or .pdf file. Invited and Regular Papers will be published in various Indexed Journals based on quality and reviewers' recommendations. Only full papers will be promoted to reviewers for thorough peer review. The paper submission platform is not yet open, please check back.

 

Organizing Committee

General Chairs (Editors)

  1. Prof. Bogdan Epureanu,
    University of Michigan
    Ann Arbor, MI 48109, USA
  2. Prof. Cho W. Solomon To,
    ASME Fellow, University of Nebraska,
    Lincoln, Nebraska, USA
  3. Prof. Hyung Hee Cho, ASME Fellow
    Yonsei University
    and The National Academy of Engineering of Korea,
    Korea

Senior Program Chair

  1. Prof. Ottavia Corbi,
    University of Naples Federico II,
    Naples, Italy

Program Chairs

  1. Prof. Zhongmin Jin,
    Xian Jiaotong University, China
    and University of Leeds, UK
  2. Prof. Constantin Udriste,
    University Politehnica of Bucharest,
    Bucharest
    Romania
  3. Prof. Sandra Sendra
    Instituto de Inv. para la Gestión Integrada de Zonas Costeras (IGIC)
    Universidad Politécnica de Valencia
    Spain

Tutorials Chair

  1. Prof. Pradip Majumdar
    Department of Mechanical Engineering
    Northern Illinois University
    Dekalb, Illinois, USA

Special Session Chair

  1. Prof. Essam Eldin Khalil,
    ASME Fellow,
    Cairo University, Cairo,
    Egypt

Workshops Chair

  1. Prof. Hyung Hee Cho, ASME Fellow,
    Yonsei University (and National
    Academy of Engineering of Korea),
    Korea

Local Organizing Chair

  1. Dr. Claudio Guarnaccia, University of Salerno, Italy

Publication Chair

  1. Prof. Marcin Kaminski,
    Department of Structural Mechanics,
    Al. Politechniki 6, 90-924 Lodz, Poland

Publicity Committee

  1. Prof. Kumar Tamma,
    University of Minnesota,
    Minneapolis, MN, USA
  2. Prof. Myriam Lazard
    Institut Superieur d' Ingenierie de la Conception
    Saint Die, France

International Liaisons

  1. Prof. Marina Shitikova,
    Voronezh State University of Architecture and
    Civil Engineering, Voronezh, Russia
  2. Prof. Olga Martin
    Applied Sciences Faculty
    Politehnica University of Bucharest
    Romania
  3. Prof. Vincenzo Niola
    Departement of Mechanical Engineering for Energetics
    University of Naples "Federico II"
    Naples, Italy
  4. Prof. Christopher G. Provatidis,
    National Technical University of Athens,
    Zografou, Athens, Greece

Steering Committee

  • Prof. Aida Bulucea, University of Craiova, Romania
  • Prof. Zoran Bojkovic, Univ. of Belgrade, Serbia
  • Prof. Ottavia Corbi, University of Naples Federico II, Italy
  • Prof. Imre Rudas, Obuda University, Budapest, Hungary

Program Committee

  • Prof. Cho W. Solomon To, ASME Fellow, University of Nebraska, Lincoln, Nebraska, USA
  • Prof. Kumar Tamma, University of Minnesota, Minneapolis, MN, USA
  • Prof. Ottavia Corbi, University of Naples Federico II, Naples, Italy
  • Prof. Pierre-Yves Manach, Universite de Bretagne-Sud, Bretagne, France
  • Prof. Jiin-Yuh Jang, University Distinguished Prof., ASME Fellow, National Cheng-Kung University, Taiwan
  • Prof. Hyung Hee Cho, ASME Fellow, Yonsei University (and National Academy of Engineering of Korea), Korea
  • Prof. Robert Reuben, Heriot-Watt University, Edinburgh, Scotland, UK
  • Prof. Ali K. El Wahed, University of Dundee, Dundee, UK
  • Prof. Yury A. Rossikhin, Voronezh State University of Architecture and Civil Engineering, Voronezh, Russia
  • Prof. Igor Sevostianov, New Mexico State university, Las Cruces, NM, USA
  • Prof. Ramanarayanan Balachandran, University College London, Torrington Place, London, UK
  • Prof. Sorinel Adrian Oprisan, Department of Physics and Astronomy, College of Charleston, USA
  • Prof. Yoshihiro Tomita, Kobe University, Kobe, Hyogo, Japan
  • Prof. Xianwen Kong, Heriot-Watt University, Edinburgh, Scotland, UK
  • Prof. Ahmet Selim Dalkilic, Yildiz Technical University, Besiktas, Istanbul, Turkey
  • Prof. Essam Eldin Khalil, ASME Fellow, Cairo University, Cairo, Egypt
  • Prof. Jose Alberto Duarte Moller, Centro de Investigacion en Materiales Avanzados SC, Mexico
  • Prof. Seung-Bok Choi, College of Engineering, Inha University, Incheon, Korea
  • Prof. Marina Shitikova, Voronezh State University of Architecture and Civil Engineering, Voronezh, Russia
  • Prof. J. Quartieri, University of Salerno, Italy
  • Prof. ZhuangJian Liu, Department of Engineering Mechanics, Institute of High Performance Computing, Singapore
  • Prof. Abdullatif Ben-Nakhi, College of Technological Studies, Paaet, Kuwait
  • Prof. Junwu Wang, Institute of Process Engineering, Chinese Academy of Sciences, China
  • Prof. Jia-Jang Wu, National Kaohsiung Marine University, Kaohsiung City, Taiwan (ROC)
  • Prof. Moran Wang, Tsinghua University, Beijing, China
  • Prof. Gongnan Xie, Northwestern Polytechnical University, China
  • Prof. Ali Fatemi, The University of Toledo, Ohio, USA
  • Prof. Mehdi Ahmadian, Virginia Tech, USA
  • Prof. Gilbert-Rainer Gillich, "Eftimie Murgu" University of Resita, Romania
  • Prof. Mohammad Reza Eslami, Tehran Polytechnic (Amirkabir University of Technology), Tehran, Iran
  • Dr. Anand Thite, Faculty of Technology, Design and Environment Wheatley Campus, Oxford Brookes University, Oxford, UK
  • Dr. Alireza Farjoud, Virginia Tech, Blacksburg, VA 24061, USA
  • Dr. Claudio Guarnaccia, University of Salerno, Italy

Topics of Interest

Mechatronics, Mechatronics systems, Machine vision, Automation and robotics, Servo-mechanics, Sensing and control systems, Automotive engineering, automotive equipment in the design of subsystems such as anti-lock braking systems, Computer-machine controls, such as computer driven machines like IE CNC milling machines, Expert systems, Industrial goods, Consumer products, Medical Mechatronics, medical imaging systems, Structural dynamic systems, Transportation and vehicular systems, Mechatronics as the new language of the automobile, Diagnostic, reliability, and control system techniques, Computer aided and integrated manufacturing systems, Computer-aided design, Engineering and manufacturing systems, Packaging, Microcontrollers / PLCs, Mobile apps Mechanical engineering and materials science, Systems and control engineering, Optomechanics (optical engineering),  Robotics, Actuation, Sensing, Motion and manipulation, Locomotion, Environmental interaction and navigation of Robots, Human-robot interaction, Control of Robots, Autonomy levels, Robotics research, Dynamics and kinematics, Education and training of Robots, Kinematics, dynamics, control, and simulation of robots and intelligent machines and systems, design of robotic mechanisms, man-machine interface and integration, robotics-related computer hardware, software, and architectures, linkage to computer-aided engineering, robotics in manufacturing and flexible automation, robotics and automation in less structured environments, vision and other non-contact sensory systems, and tactile and other contact sensory technology, Structural analysis, Structural Mechanics, Applied Mechanics, materials science and applied mathematics to compute a structure's deformations, internal forces, stresses, support reactions, accelerations, and stability. Method of Joints, Method of Sections, Elasticity methods, Methods using numerical approximation, Finite Elements, Finite Differences, Boundary Elements, Integral Equations, Optimization for Structural analysis. Others...

Location and Venue

About:     Majorca, Spain     Map of  Majorca, Spain     Photos from Majorca, Spain     Conference Venue     How to get to Majorca, Spain    Majorca, Spain Travel Guide

Conference Publications



* Authors will be informed about the title of the Journal before their registration.