MATERIALS 2023:The 15th International Conference on
Materials

Bern, Switzerland, December 21-23, 2023

About the Conference

You can upload an Abstract in the conference. The Full Article is not mandatory. You can give us a full article later or after the conference. The Full papers (not mandatory) will be evaluated for possible publication in Scopus, ISI, DBLP, ACM, EI Compendex, GoogleScholar, Copernicus indexed Journals. After peer review your full article will appear in these Journals We can publish your paper as Chapter in Books of Springer Verlag also. We can also recommend your paper in some other conference that publish papers with IEEE in IEEEXplore or with Springer Verlag.



* Contact us by email: support@inase.org, support@inase.org   
Registration fees       Publication Ethics and Malpractice Statement     Deadlines

 

Abstract (or Full Paper) Submission

Organizing Committee

  • Prof. Igor Neelov, Head of International Laboratory of Biopolymer and Biosytems, Institute of Bioengineering, ITMO University, Saint Petersburg, Russia
  • Prof. Nikos Markatos, National Technical University of Athens, Greece (Professor Emeritus)
  • Prof. Jun Zhang, Deputy Director, College of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot 010021, P. R. China
  • Prof. Samuel Lofland, Rowan University, Glassboro, New Jersey, USA
  • Prof. Ashutosh Tiwari, Biosensors and Bioelectronics Centre, IFM-Linkopings Universitet, 581 83 Linkoping, Sweden
  • Prof. Sukhvinder Badwal, FTSE, FAIE, CSIRO Energy Technology, Private Bag 33, Victoria, Australia
  • Prof. Vesselin Dimitrov, Department of Silicate Technology, University of Chemical Technology and Metallurgy, Techn. Univ. of Sofia, Bulgaria
  • Prof. Takeshi Fukuda, Saitama University, Sakura-ku, Saitama 338-8570, Japan
  • Prof. Seong Ihl Woo, Korea Advanced Institute of Science and Technology, Korea
  • Prof. David N. Seidman, Walter P. Murphy Professor, Northwestern University, Evanston, IL 60208-3108, USA
  • Prof. Jim P. Zheng, Florida A&M University and Florida State University, USA
  • Prof. Victor Mosquera Tallon, Universidade de Santiago de Compostela, Santiago de Compostela, Galicia, Spain
  • Prof. Tadaaki Nagao, Group Leader, National Institute for Materials Science, Tsukuba, Ibaraki, Japan
  • Prof. Vincenzo Niola, Departement of Mechanical Engineering for Energetics, University of Naples "Federico II", Naples, Italy

Steering Committee

  • Prof. Myriam Lazard, Institut Superieur d'Ingenierie de la Conception, 27 rue d�Hellieule, 88100 Saint Die, France
  • Prof. Victor M. Castano, Universidad Nacional Autonoma de Mexico, Mexioc City, Mexico
  • Prof. Peter Chang, University of Saskatchewan, Saskatoon, Saskatchewan, Canada
  • Prof. Dean-Mo Liu, National Chiao Tung University, HsinChu, Taiwan
  • Prof. Rui Vilar, Instituto Superior Tecnico, Lisboa, Portugal
  • Prof. Hugh J. Byrne, Dublin Institute of Technology, Dublin, Ireland
  • Prof. Won-Chun Oh, Hanseo University, Seosan-si, Chungcheongnam-do, South Korea
  • Prof. Yuanhua Lin, Tsinghua University, Haidian, Beijing, China
  • Prof. S.C. Tjong, City University of Hong Kong, Sham Shui Po District,New Kowloon, Hong Kong
  • Prof. Huan-Tsung Chang, National Taiwan University, Taipei City, Taiwan
  • Prof. Yoshitake Masuda, National Institute of Advanced Industrial Science and Technology (AIST), Tokyo, Japan
  • Prof. Jing Zhang, Donghua University, Shanghai, China
  • Prof. Veronica Cortes de Zea Bermudez, Universidade de Tras-os-Montes e Alto Douro, Vila Real, Portugal
  • Prof. Jun Zhang, Inner Mongolia University, Hohhot, Inner Mongolia, China
  • Prof. Israel Felner, Hebrew University of Jerusalem, Jerusalem, Israel
  • Prof. Sukhvinder Badwal, CSIRO Energy Technology, Australia
  • Prof. Te-Hua Fang, National Kaohsiung University of Applied Sciences (KUAS), Kaohsiung, Taiwan
  • Prof. Belkheir Hammouti, Mohammed Premier University, Oujda, Morocco
  • Prof. Mohd Sapuan Salit, Universiti Putra Malaysia, Selangor, Malaysia
  • Prof. Kwansoo Chung, Seoul National University, Seoul, South Korea
  • Prof. Zhongfang Chen, University of Puerto Rico, San Juan, Puerto Rico
  • Prof. Soon-Ku Hong, Chungnam National University, Daejeon, South Korea
  • Prof. Hannes Jonsson, University of Iceland, Reykjavik, Iceland
  • Prof. Culea Eugen, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
  • Prof. Vesselin Dimitrov, University of Chemical Technology and Metallurgy, Sofia, Bulgaria
  • Prof. Shadpour Mallakpour, Isfahan University of Technology, Isfahan, Iran

Program Committee

  • Prof. Amit Bandyopadhyay, AAAS Fellow , ASM International Fellow , AIMBE Fellow and ACerS Fellow, Washington State University, Pullman, State of Washington, USA
  • Prof. Yong Ding, Georgia Institute of Technology, Atlanta, GA, USA
  • Prof. Yulin Deng, Georgia Institute of Technology, Atlanta, GA, USA
  • Prof. Paul H. Holloway, Distinguished Professor, University of Florida, Gainesville FL, USA
  • Prof. Saad Khan, North Carolina State University, Raleigh, North Carolina, USA
  • Prof. Igor Sevostianov, New Mexico State University, Las Cruces, New Mexico, USA
  • Prof. Mohindar S. Seehra, West Virginia University, Morgantown, West Virginia, USA
  • Prof. Tao Liu, Florida State University, Tallahassee, Florida, USA
  • Prof. Samuel Lofland, Rowan University, Glassboro, New Jersey, USA
  • Prof. Daniel Guay, Institut National de la Recherche Scientifique (INRS), Universite du Quebec,Quebec, Canada
  • Prof. Tian Tang, University of Alberta, Edmonton, Alberta, Canada
  • Prof. Roland Frankenberger, University of Marburg, Marburg, Germany
  • Prof. Mohamedally Kurmoo, Universite de Strasbourg, Strasbourg, France
  • Prof. C. C. Sorrell, University of New South Wales, Sydney, NSW, Australia
  • Prof. Concepcion Lopez, Universitat de Barcelona, Barcelona, Spain
  • Prof. Alan Dalton, University of Surrey, Guildford, Surrey, UK
  • Prof. Kourosh Kalantar-Zadeh, RMIT University, Melbourne, Australia
  • Prof. Tetsu Yonezawa, Hokkaido University, Kita Ward, Sapporo, Hokkaido Prefecture, Japan
  • Prof. Daolun Chen, Ryerson University, Toronto, Ontario, Canada
  • Prof. Mohamed M. Chehimi, Universite Paris Diderot, Paris, France
  • Prof. Vincenzo Fiorentini, Universita degli studi di Cagliari, Cagliari, Italy
  • Prof. Tamas Ungar, Eotvos Lorand University (ELTE), Budapest, Hungary
  • Prof. Anthony W. Coleman, Universite Claude Bernard Lyon 1, Lyon, France
  • Prof. Albert Chin, IEEE Fellow, OSA Fellow, National Chiao Tung University, Hsinchu, Taiwan
  • Prof. Artur Cavaco-Paulo, Universidade do Minho, Braga, Portugal
  • Prof. Yoshihiro Tomita, Kobe University, Kobe, Japan
  • Prof. Jian Wang, Los Alamos National Laboratory, Los Alamos, NM, USA
  • Prof. Byung K. Kim, Pusan National University, Busan, South Korea
  • Prof. John T. Sheridan, University College Dublin, Belfield, Dublin, Ireland<
  • Prof. Chi-Wai Chow, National Chiao Tung University, Hsinchu, Taiwan
  • Prof. Christian M. Julien, Universite Paris-6, Paris, France
  • Prof. Chun-Hway Hsueh, National Taiwan University, Taipei, Taiwan<
  • Prof. Luigi Nicolais, Universita Degli Studi di Napoli Federico II, Napoli, Italy
  • Prof. Hyung-Ho Park, Yonsei University, Seodaemun-gu, Seoul, Korea

Topics of Interest

Inorganic Materials, Metallic Materials, Organic Materials, Composite Materials, Macroscopic Properties of Materials, Failure Analysis, Strength of Materials, Condensed Matter Physics, Materials Physics, Refractory Materials, Functionally Graded Materials, Materials in Industry, Biomaterials, Bioplastics, Carbon, Ceramics, Ceramography, Composite materials, Alloys, Glass and Glass science, Metals, Nanomaterials, Polymers, Polymer engineering, Refractory, Electronic and magnetic materials, Semiconductors, Thin Films, Functionally Graded Materials, Crystallography, Forensic engineering, Forensic materials engineering, Materials characterization, Raman spectroscopy, energy-dispersive spectroscopy (EDS), chromatography, thermal analysis, electron microscope analysis, Metallography, Mineralogy, Metallurgy (extraction, microstructure and processing), Microtechnology, Microelectromechanical systems (MEMS), Molecular design software Molecular modelling, Nanomaterials, Nanotechnology, molecularly engineered materials, Rheology, granular materials, Surface science/catalysis, interactions and structures between solid-gas solid-liquid or solid-solid interfaces, Textile reinforced materials, Transparent materials, Tribology, Others...

Location and Venue

Conference Publications

You can upload an Abstract in the conference. The Full Article is not mandatory. You can give us a full article later or after the conference. The Full papers (not mandatory) will be evaluated for possible publication in Scopus, ISI, DBLP, ACM, EI Compendex, GoogleScholar, Copernicus indexed Journals. After peer review your full article will appear in these Journals We can publish your paper as Chapter in Books of Springer Verlag also. We can also recommend your paper in some other conference that publish papers with IEEE in IEEEXplore or with Springer Verlag